Special camera for number plate recognition
WASAT has been specially developed for license plate recognition. The integrated LED line works as appealing running light, while four of the total of 16 white light LEDs are always turned on. The running light illuminates the approaching license plate, this guarantees reliable detection even at night when headlights are switched on. White light is far superior to IR light when it comes to reliably detecting soiled "night and fog" signs.
The housing is made of sturdy cast aluminum and therefore extremely robust. The camera weighs only 530 gr. And is even for barriers a lightweight.
The camera comes with a short piece of cable and our SnapIn special plug for direct Pollux connection.Connection cables with different lengths are available for connection to the recognition device, standard 5m or 12m. The cables only need to be plugged together. The camera is powered directly via the Pollux recognition device or HinnKey.
Simple barrier and door mounting
WASAT is sturdy and easy to assemble. Simply screw the special camera to the barrier boom or the door leaf and connect it to the Pollux recognition device or HinnKey. Finished!
The detection range for three different lenses is shown in the following table. It is recommended to place a stop line on the road surface. Details about the stop line can be found in the Pollux manual.
|Lense focal length [mm]||Min [m]||Max [m]||Stop line [m]|
The camera is available in two colors: white or anodised aluminum. On request, a white mounting plate (170x170mm) is available, for example for screwing to the barrier beam (see picture above).
Optionally, the camera can be supplied with a cable connection on the left or right. On request, the camera can also be mounted upright, in this case, this must be shown separately when ordering, as well as whether the top or bottom of the cable should emerge.
Standard version is white, with cable connection on the right side (see picture below).
The camera comes standard with a lens with the focal length of 6mm. Special versions with different focal lengths are possible, see above table.
Dimensions (including cable gland):
175 x 55 x 79 mm (L x W x H)
Four mounting holes:
132 x 45 mm, diameter: 5,5mm
Protection glass: IP64
Mounting plate: 170 x 170 mm